The master volt (83007021) BI 702-S battery separation diode is based on conventional diode technology. The separation diode is suitable for use in conventional systems with a alternator and a battery charger as well as 2 or 3 battery circles. The sloping diode voltage (approx. 0.6 V) can be compensated for by adapting the output voltage of the connected charger or generator. Master volt battery chargers and alpha per MB alternator controller are equipped with an automatic voltage drop compensation by default.
Master volt separation diodes are used to distribute the charging current between several batteries of the same nominal voltage. The use of a separation diode ensures that the battery rates do not unload each other. Master volt separation diodes are only suitable for assembly between the plus output of a power pathogen (charger or alternator) and the plus connection of the battery rates. The minus output of the power pathogo and the minus connections of the battery rates must be connected directly to each other. Separation diodes cannot be used in a system with a combined loader/converter.
Important product features
- has integrated compensation diode
- Max. Power at the output of battery charger 25a / 50a
- Max. Stream at the output alternator 70a
- 2 battery outputs
- For 12V or 24V batteries
- Very compact, avoiding in an absolutely massive solid body of wear
compact and light
The Master volt BI battery separation diodes are compact and from an absolutely solid solid, which avoids wear. They weigh between 580 and 1300 grams.
robust and durable
Completely corrosion-proof material with aluminum cooling body. The electronic components are covered with plastic, diode splinters in the case of the BI models.
Fast installation
Composite plates with connection cable shoes and solid screw connections with nuts and closure rings to ensure safe installation.
application areas
The installation from the battery separation relay should always be carried out when there are two separate spectacles or are created. For example, it is in the following cases:
- Motorhomes
- Caravan with its own battery for autonomous operation
- Military vehicles (e.g. radio vehicles)
- TRUCK
- Coaches
- Car with strong additional consumers (e.g. powerful hi-fi amplifiers)
- Smaller motor yachts without on -board generator
- Rescue service vehicles
The master volt (83007021) BI 702-S battery separation diode is based on conventional diode technology. The separation diode is suitable for use in conventional systems with a alternator and a battery charger as well as 2 or 3 battery circles. The sloping diode voltage (approx. 0.6 V) can be compensated for by adapting the output voltage of the connected charger or generator. Master volt battery chargers and alpha per MB alternator controller are equipped with an automatic voltage drop compensation by default.
Master volt separation diodes are used to distribute the charging current between several batteries of the same nominal voltage. The use of a separation diode ensures that the battery rates do not unload each other. Master volt separation diodes are only suitable for assembly between the plus output of a power pathogen (charger or alternator) and the plus connection of the battery rates. The minus output of the power pathogo and the minus connections of the battery rates must be connected directly to each other. Separation diodes cannot be used in a system with a combined loader/converter.
Important product features
- has integrated compensation diode
- Max. Power at the output of battery charger 25a / 50a
- Max. Stream at the output alternator 70a
- 2 battery outputs
- For 12V or 24V batteries
- Very compact, avoiding in an absolutely massive solid body of wear
compact and light
The Master volt BI battery separation diodes are compact and from an absolutely solid solid, which avoids wear. They weigh between 580 and 1300 grams.
robust and durable
Completely corrosion-proof material with aluminum cooling body. The electronic components are covered with plastic, diode splinters in the case of the BI models.
Fast installation
Composite plates with connection cable shoes and solid screw connections with nuts and closure rings to ensure safe installation.
application areas
The installation from the battery separation relay should always be carried out when there are two separate spectacles or are created. For example, it is in the following cases:
- Motorhomes
- Caravan with its own battery for autonomous operation
- Military vehicles (e.g. radio vehicles)
- TRUCK
- Coaches
- Car with strong additional consumers (e.g. powerful hi-fi amplifiers)
- Smaller motor yachts without on -board generator
- Rescue service vehicles
data sheet
Generally
| item number |
8-66-008170 |
| Manufacturer part number |
83007021 |
| Product |
Battery separation diodes |
| Manufacturer |
Master volt |
| IP protection |
IP21 |
| Dimensions (LXBXH) |
157 x 140 x 80 mm |
| Weight |
0.58 kg |
| EAN |
4250983252293 |
