This 2-wire solar cable professionally connects the solar charge controller to the solar modules in a solar system. On the module side, the cable has original Multi-Contact MC4 connectors and on the charge controller side, the cable ends are cut for easy removal of the sheath and exposure of the bare wire. The cable can be connected to any charge controller with the appropriate mount (min. 4mm²). Most 12V modules have MC-4 connectors. If your module has other plugs, you will find the right adapter in our shop.
Due to the cross-section, cables with 4mm² from a length of 5m are only suitable for 24V systems and upwards. For 12V you should use at least 6mm².
Length: 5m
All components were crimped with specialist tools and have an optimal connection quality. The processed solar cable comes from the manufacturer Lapp-Kabel and is a top brand product.
Features solar cable
- 4mm cable cross-section
- double insulated
- very flexible
- VDE 0295 class 5 and IEC 6022
- resistant to: UV, ozone, weather, water
- Very resistant to chemicals and oil - Fire-resistant according to VDE 0482-332-2, DIN
Features MC-4 male & female
- Touch protection, unplugged IP2X
- Degree of protection, IP67 when plugged in
- Operating temperature range -40° ...90° C
- Insulation material PA
- Snap-in locking system
- Cable strain relief according to IEC 61984
- Contact system MC contact lamellae
- Contact material copper, tinned
- Flame class UL94-V0
- Protection class II
- System voltage up to 1000V
Weight 1.4kg
Test voltage 2500 V
Conductor structure DIN 0282 PART 4 HD 22.4 S3 according to IEC 60245-4
Manufacturer Offgridtec
Permanent tensile load 15 N/mm²
Copper content 77 kg / km
Outside diameter 11.8 - 15.1 mm
Temperature range -30°C to +60°C
Material copper, tinned
Product type 1 connection cable
Cable cross-section 4mm²
Cable length 5m
Features double insulated
