Skip to content

Actisense NMEA 0183 Buffer-Pro Buf-2

ActisenseSKU: PRO-BUF-2

Price:
Sale price€819,00 EUR Regular price€899,00 EUR

Tax included Shipping calculated at checkout

Versand in 1-3 Werktagen

Description

NMEA 0183 Buffer-Pro Buf-2
2 Opto-isolated NMEA 0183 inputs (Listener), 12 ISO-Drive NMEA 0183 Outputs (Talker), Serial Port, Ethernet Port
The Pro Buf-2, an intelligent type tester NMEA buffer.
Two opto-isolated inputs and twelve ISO-Drive ™-insulated outputs. Offers device protection and excellent flexibility in a product.

The Pro Buf-2 is robust, has a stainless steel case and offers insulation at all inputs and outputs. With two NMEA 0183 inputs, twelve NMEA 0183 outputs, a bidirectional serial port and an Ethernet port, the Pro Buf-2 is a perfect solution for larger leisure shipping, professional shipping and a great addition to systems, the type approved devices .

The Pro Buf-2 was developed for most NMEA 0183 systems and is immediately ready for use by simply wiring the two-mode inputs as required.  

The manually configurable basic operating modes of the intelligent NMEA 0183 buffer include variations of buffer modes, intelligent automatic switchover and combination modes.

In all other configurations, the 'user configuration mode' is selected when the mode inputs remain free. The web-based configuration tool enables the Pro Buf-2 to be completely adjusted and is compatible with all common operating systems. The use of the web -based configuration tool enables a fine -tuning of the data available at each output.

For a quick and easy installation the probuf-2 has 2-part connector that enables the use of screw terminals* and a professional DIN rail assembly system (DIN rail not included). The device can also be installed directly on the front wall.

Helpful LEDs show electricity, data input, data output and alarm status to support the diagnosis.
Data statistics and load display via the web tool offer a real -time view of the data.

Characteristics:
-
2 Optoisolated inputs
-12 ISO-Drive NMEA 0183 outputs
- Ethernet connection
- flexible operating modes
- Automatic adjustment of the baud rate at the inputs
- Options for the alarm output
- web -based configuration tool
- Diagnostic LEDs
- Extended data filtering and forwarding
- 2 virtual carwitch modules
- Data statistics and load display via web tool
- designed for 12/24 volt supply
- Future -proof by easily updated firmware
- 2-part connector system
- Stainless steel housing with DIN rail mounting option
- Typed

    Services:
    -
    Flexible configuration options for buffer from carWitch or combine NMEA data
    -ISO-Drive separates the lister from the talker to protect both the Pro buff and every connected device.
    - Fast bidirectional data connection to a monitoring and control software application
    - PRO buf can be configured with any web browser on any operating system
    -Out-of-the-box works without configuration for basic installations or can be easily configured by the user as required
    - The relay output is compatible with integrated alarm systems and NMEA alarm sets can be displayed and executed on an MFD
    - Easy access via the network, no implementation of the device or a serial connection to the PC required.
    - A quick visual review gives the user the certainty that each input and output data forwards data
    - Functions can be used to fine -tune data to avoid data overloads at the outputs and connected lists
    - enables the automatic selection of the data priority between two devices of the same data type (e.g. GPS)
    -shows NMEA 0183 on every E/A port and how often it matters, ideal for low-level diagnosis
    -enables use in 24 V-DC power supply systems for large ships
    - With a simple update process via the ActiSense Toolkit via Ethernet
    - Fast installations and supports both screw and screwless clamp types. Ideal for quick diagnostic exchange
    - increased shelf life, simple installation and high performance
    - Can be installed on ships that are subject to the rules of Class Society

       

    power supply

    Input supply voltage

    10 to 35 V DC

    Input supply flow

    325 MA max at 12 V DC (all outputs at full control at 100 ohm loads)

    Input protection

    Continuous reversal, transient overvoltage and ESD protection

    Power knife

    LED, blue - indicates that the device works properly

    Input supply connection

    Plug-in 2-way screw clamp, grid 5.08 mm

    NMEA 0183 port-Listener & Talker

    Number of listers / entrance sports

    2 isolated NMEA 0183 listeners

    Number of talks / starting sports

    12 isolated NMEA 0183 spokesman

    compatibility

    Complete NMEA 0183, RS422 & RS232 compatible. RS485 list compatible

    Speed ​​/ baud rate

    4800 to 38400 BPS

    Talker output voltage driver

    > = 2.2 V (difference) at 100 ohms

    Talker output current driver

    20 mA maximum per output

    Protection of the loudspeaker output

    Short circuit and ESD

    Speaker data advertisement

    LED, orange (flashes with data rate)

    Input voltage tolerance of the listener

    -15 V to +15 V permanent, -35 V to +35 V briefly (<1 second)

    Listener entrance protection

    Electricity limited, overstream protection up to 40 VDC and ESD protection

    Listener data display

    LED, green (flashes to display a valid input)

    connections

    Plug-in 2/3-way screw terminals, grid 5.08 mm

    Serial interface

    compatibility

    RS422 and RS232 compatible. RS485 list compatible

    Speed ​​/ baud rate

    4800 to 115200 BPS

    Output voltage drive

    > = 2.1V (difference) at 100 ohms

    Output current drive

    20ma max.

    Output protection

    Short circuit and ESD

    Input voltage tolerance

    -15 V to +15 V permanent, -35 V to +35 V briefly (<1 second)

    Input protection

    Electricity limited, overstream protection up to 40 VDC and ESD protection

    Data indicators

    LEDs: green = received, orange = send

    connections

    Plug-in 3-way screw terminals, grid 5.08 mm

    Ethernet connection

    Host interface

    10/100 base, automatic polarity detection

    Supported protocols

    TCP/IP for configuration and firmware update

    TCP/IP and UDP for NMEA 0183 communication

    Indicators

    Green = connection/activity, yellow = 100 Mbit/s

    Interconnects

    RJ45

    isolation

    NMEA 0183 listener

    Opto-isolated, Hi-Pot tested up to 1000V

    NMEA 0183 spokesman

    Used Isodrive
    TM
    , Hi-pot tested up to 1000 V

    Serial interface

    Used Isodrive
    TM
    , Hi-pot tested up to 1000 V

    Alarm relay

    Hi-pot tested up to 1000V

    Ethernet connection

    2kv for 60s

    Mode inputs

    Input voltage area

    0 to 35 V DC

    Protection

    Transient overvoltage and ESD protection

    connections

    Plug-in 2-way screw terminals, grid 5.08 mm

    Alarm output

    contacts

    Usually, usually open and normally closed

    Alarm indicator

    LED, red shows a valid alarm state

    Contact reviews

    35VAC / 50VDC

    connections

    Plug-in 3-way screw terminals, grid 5.08 mm

    Mechanically

    Housing material

    Stainless steel 316

    Dimensions

    210 mm (W) x 128 mm (h) x 27 mm (t)

    Weight

    530g

    Assembly

    Scot assembly or DIN rail mounting (DIN kit 1)

    Approval and certifications

    EMC

    IEC 60945: 2002-08, DNVGL-CG-0339: 2019 & IACS UR E10 REV7

    Compass security distance

    750 mm

    Type approval certificate

    Rina

    operating temperatur

    -25 to +70 ° C

    Storage temperature

    -40 to +85 ° C

    Relative air humidity (RH)

    95% at 55 ° C

    environmental Protection

    IP40

    guarantee

    5 years

     

    • 4800 to 115200 BPS
    • 10 to 35 V DC
    • 325MA max @ 12V DC (all outputs @ full in 100 ohm loads)
    • Continuous reverse polarity, transient overvoltage and ESD protection
    • IEC 60945: 2002-08, DNVGL-CG-0339: 2019 & IACS UR E10 REV7

    Rina-certified

    GPSR Information

    Hersteller
    Name: Actisense
    Anschrift: 21 Harwell Road 22
    PLZ, Ort: BH17 0GE, Poole
    Land: Vereinigtes Königreich
    Email: michael.leggett@actisense.com
    Web: www.actisense.com
    Verantwortliche Person
    Name: Elna GmbH
    Anschrift: Heidehofweg 22
    PLZ, Ort: 25499, Tangstedt
    Land: Deutschland
    Email: info@elna.de

    Estimate shipping

    You May Also Like

    last seen