Blue Sea BS 6011200 mini dual circuit battery switch black with rotary knob

Blue Sea BS 6011 Mini dual-circuit battery switch red with rotary knob simultaneously switches two separate battery banks. 3 switch positions (ON-OFF). 2 battery inputs.

MAIN FEATURES

• Simultaneously switches two separate battery banks or combines battery banks of all consumers
• Allows switching between battery banks without mains interruption
• Ignition proof for installation onboard a gasoline powered boat
• Housing design allows for surface mounting or panel mounting

TECHNICAL DETAILS

• Switch positions: 3 - On/Off
• Battery Combination: Yes
• Colour: black
• Alternator Field Disconnect: No (Isolator protects the diodes in the alternator if the switch is turned OFF while the engine is running. If the isolator is not being used to protect the alternator, an LED can be connected to the AFD terminals to indicate when battery switch is in any position other than OFF.)
• Maximum voltage: 32V DC
• Clamp bolt torque: 13.56 Nm
• Continuous charge current: 300 amps.
• Peak charge current.: 450 amps
• 30 sec cranking current: 675 amps per circuit. The current required by the starter before starting the engine. The cranking current varies significantly during the starting cycle. First, there is a large surge of current required to overcome the motor's inertia and compression. This increase can be two to four times the average starting current. The starting current is used for sizing batteries, cables and battery switches.
• Battery input: 2
• Cable distance for 4/0 AWG cable: 28.45 mm
• Recommended cable size: 4/0 AWG (120mm²)
• Mounting holes: #10 screws
• Clamp bolt size: 3/8" - 16 (M10)

Weight: 0.36kg