Skip to content

Blue Sea BS 9003e battery master switch 2 positions

Blue SeaSKU: BS9003E

Price:
Sale price€55,70 EUR Regular price€65,63 EUR

Tax included Shipping calculated at checkout

Shipping in 1-3 working days

Description

Blue Sea BS 9003e main battery switch for diesel and petrol engines. The switch is gas-tight and suitable for a battery / battery bank.

MAIN FEATURES

  • Ignition proof for installation on board a boat
  • Housing design allows for surface mounting or panel mounting

TECHNICAL DETAILS

  • Switch positions: On/Off
  • Battery combination: no
  • Colour: red
  • Alternator Field Disconnect: No (Isolator protects the diodes in the alternator if the switch is turned OFF while the engine is running. If the isolator is not being used to protect the alternator, an LED can be connected to the AFD terminals to indicate when battery switch is in any position other than OFF.)
  • Maximum voltage: 48V DC
  • Clamp bolt torque: 15.82 Nm
  • Continuous charge current: 350 amps .
  • Peak charging current.: 600 amps 
  • Starting current 30 sec: 1200 amps. The current required by the starter before starting the engine. The cranking current varies significantly during the starting cycle. First, there is a large surge of current required to overcome the motor's inertia and compression. This increase can be two to four times the average starting current. The starting current is used for sizing batteries, cables and battery switches.
  • Battery input: 1
  • Cable distance for 4/0 AWG cable: 27.94 mm
  • Recommended cable size: 4/0 AWG (120mm²)
  • Mounting holes: 1/4"(M6) screw
  • Clamp bolt size 3/8" - 16 (M10)

Weight: 0.59kg

GPSR Information

Hersteller
Name: Navico Group EMEA BV
Anschrift: Snijdersbergweg 93
PLZ, Ort: 1105 AN, Amsterdam
Land: Netherlands
Email: info.EMEA@OneASG.com

Estimate shipping

You May Also Like

last seen