Skip to content

Dekalin 6257812 DEKAvator 30 ml bottle adhesion promoter cleaner

DekalinSKU: 8-01-007635

Price:
Sale price€13,10 EUR

Tax included Shipping calculated at checkout

Shipping in 1-3 working days

Description

Dekavator is an adhesion promoter that improves the adhesion of the various Dekalin products based on MS polymer, such as Dekasyl, on closed surfaces. In the case of substrates with a low surface tension (usually plastics) or if the composition of the substrate is not known, it is advisable to use the adhesive activator Dekavator. It ensures permanent adhesion and prevents the ingress of moisture outdoors. The decavator improves the bondability because it acts as a chemical bridge between the adherend and the adhesive.

applications

For pre-treatment of:

  • aluminum, steel, copper and brass
  • Powder coated metal
  • Painted metal (the compatibility of the solvent with the substrate should be checked beforehand)
  • (Ceramic coated) glass
  • Polyester (GRP)
  • ABS and PVC

Characteristics

  • Adhesion improving and cleaning
  • Fast drying, flash off time approx. 5 minutes
  • Easy to use
  • Economical consumption

processing

The substrates should be clean, dry and free of dust and grease. The packaging should remain tightly closed until use. Dekavator can be used straight from the original packaging provided contamination and viscosity increase is avoided. The color should be transparent (if the color is milky transparent the product can no longer be used). It should be prevented that Dekavator comes into contact with water until the product has hardened. Therefore it is recommended to make two openings in the top of the can in the aluminum seal (if possible, depending on the can). Close the can immediately after use. Apply Dekavator in a thin layer. Rub the surface vigorously with a clean, paint-free cloth moistened with Dekavator. After a drying time of about 5 minutes (the solvent should be completely evaporated; the lower the temperature, the longer the drying time), the adhesive/sealant can be applied. Best adhesion is achieved when the adhesive/sealant is applied within 4 hours after Dekavator has dried. Therefore, only as much should be pretreated as can be sealed/bonded within 4 hours. Avoid touching the pre-treated surfaces as the greasy film on your fingers can lead to poor adhesion.
Note 1: Due to its incompatibility with paints, Dekavator should not be applied to areas that are to be painted later. In this case, a stencil or masking tape should be used to apply Dekavator only in the area of ​​the bond/sealing (however, it is possible to easily remove Dekavator residue with eg isopropyl alcohol (IPA) or acetone).
Note 2: If the surface is heavily soiled, it must first be cleaned with, for example, IPA or acetone. It is recommended to test the compatibility of the surface with this cleaner beforehand.

Delivery time: 1-3 working days

Technical specifications:

  • Solids content: approx. 8%
  • Specific density (20°C): approx. 0.76 kg/litre)
  • Flash point: approx. 9°C
  • Drying time (20°C/50% RH): approx. 5 minutes
  • Colour: transparent
  • Packaging size: 30ml aluminum can
  • Consumption: approx. 20m² / liter
  • Storage temperature: +5°C - +30°C
  • Storage: unopened up to 12 months

Scope of delivery:

1x Dekalin Dekavator 30ml

data sheet

Generally
item number 8-01-007635
Manufacturer part number 6257812
Manufacturer decalin
EAN 4046085625789

GPSR Information

Hersteller
Name: decalin
Anschrift: Musterstrasse 10
PLZ, Ort: 12345, Musterstrasse
Land: Germany

Estimate shipping

You May Also Like

last seen