Skip to content

Victron Filax 2 transfer switch CE 230V/50Hz-240V/60Hz

Victron EnergySKU: SDFI0000000

Price:
Sale price€309,00 EUR Regular price€364,14 EUR

Tax included Shipping calculated at checkout

Shipping in 1-3 working days

Description

The Victron Energy Filax ultra-fast transfer switch (MPN SDFI0000000) is designed to transfer critical or sensitive loads such as computers, industrial control equipment, or modern consumer electronics from one AC power source to another. The primary power source is typically the utility grid, a generator, or a shore connection. An inverter usually serves as an alternative source. With its transfer time of less than 20 milliseconds, even sensitive loads continue to operate without interruption.

The Filax is not designed to power household appliances with high power consumption, such as washing machines or electric motors.

Intermittent switching function

The Filax is a transfer switch with a gap-free (non-bridging) switching function. The maximum time for switching loads is 16 ms. The load is normally supplied from the main power source and is switched to the alternative source in the following cases:

  • The voltage of the main power source falls below the threshold.
  • The frequency of the main power source falls below the low frequency threshold or exceeds the high frequency threshold.

The switchback from the alternative power source to the main power source occurs as soon as the voltage and frequency values ​​of the main power source remain within the specified switchback limits for 30 seconds.

Technical data

  • Max. current: 16A
  • Max. switching time: 16 ms
  • Switching delay for switching back: 30 seconds
  • Operating temperature range: -20°C - +50°C
  • Humidity (non-condensing): Max. 95%
  • Protection class: IP65
  • Weight: 0.8 kg
  • Dimensions: 120 x 255 x 75 mm

installation

  • Install the Filax in a dry and well-ventilated environment.
  • The input cables from the generator/main power supply and the output cables to the devices must be connected according to the wiring diagram.
  • If a load of less than 850 watts is connected, the wire jumpers must be removed.
  • The frequency (50 Hz or 60 Hz) is set using a jumper. If the jumper is not set for the frequency, the switching thresholds for the voltage will be incorrect.
  • Both inputs must be protected against current values ​​exceeding 16 amperes.
  • The front cover of the case is attached using the four screws provided.
  • The Filax is now ready for use.

Scope of delivery:

1x Victron Energy Filax transfer switch SDFI0000000
4x fastening screws
1x instruction manual

GPSR Information

Hersteller
Name: Victron Energy BV
Anschrift: The Palm 35
PLZ, Ort: 1351, JG Almere
Land: Netherlands
Email: sales@victronenergy.com
Web: https://www.victronenergy.com

Estimate shipping

You May Also Like

last seen