Skip to content

Mente Marine ACS R Fully automatic trim tab control (longitudinal axis)

Mente MarineSKU: ACS R

Price:
Sale price€549,00 EUR Regular price€649,95 EUR

Tax included Shipping calculated at checkout

Shipping in 1-3 working days

Description

Mente Marine ACS R (roll) fully automatic trim tab control for existing trim tabs takes the work of trimming away from you when there are changes in course and wind as well as changes in the seating positions of passengers.

  • Compatibility (hydraulic trim tabs): Bennett, Instatrim, Trimmaster, TFX Teleflex, TX Controls
  • Compatibility (electromechanical trim tabs): Bennett, Lectrotab, Lenco, Eltrim, Ultraflex

The deep-V hulls of modern sport boats are designed to provide a smooth ride in rough water. The greater the deadrise, the more necessary it is to maintain a straight course using trim tabs. Roll and pitch depend on the wind and the position of the passengers. The longitudinal angle, also known as trim, depends on speed and load. When changing course, the wind direction also changes, and the boat must be re-trimmed. If passengers change position, the trim must also be readjusted. This need to constantly adjust the trim to changing load conditions distracts the skipper unnecessarily and therefore poses a safety risk at high speeds.

Longitudinal axis

 

 

The Mente Marine ACS R (Roll) fully automatic trim tab control automatically adjusts the boat to an optimal trim position relative to the longitudinal axis by eliminating heeling. It is the best choice for small and fast boats with minimal bow rise.

Curve detection

During turns, the boat tends to lean towards the inside of the turn. The system incorporates a gyroscope that detects such maneuvers. Therefore, trim adjustments are not made while turning. The system automatically prevents unnecessary adjustments, allowing the boat to exit the turn with optimal trim. The AUTO LED indicator flashes when the system detects a turn and does not change the trim. Once a stable straight-ahead course is established, the new trim is measured, and the Mente Marine ACS system adjusts the trim accordingly.

Adaptive System

The Mente Marine ACS system adjusts to boats of all sizes. Thanks to the adaptive system, the boat can sail with an optimal trim, taking into account differences in size and the operation of the trim tab.

The system also detects varying sea conditions. In calm water, it corrects more quickly than in rough seas. This allows for a rapid response when necessary and prevents unnecessary trim tab movements in high waves.

Displacement hull

When planing speed is undershot, the trim tabs become ineffective. The Mente Marine ACS detects this condition and does not attempt to correct the trim while in displacement mode. During acceleration, the Mente Marine ACS system automatically activates and corrects the trim even before the boat has fully accelerated.

The AUTO indicator flashes during displacement mode. This flashing indicates that automatic mode is active but temporarily not in use due to the low speed.

Automatic/Manual mode

The automatic button is used to set the operating mode of the Mente Marine ACS system. A short press of the automatic button switches between automatic and manual modes.

In automatic mode, the boat's trim is adjusted automatically, provided the indicator light is illuminated. If the indicator light is flashing, automatic mode is locked while the boat is making a sharp turn or cruising in displacement mode.

Of course, the automatic function can be switched off and the panel used as a manual control unit, which is useful, for example, when sailing in rough water, in order to trim the bow even lower and thus make the journey more comfortable.

TECHNICAL DETAILS

  • Compatibility (hydraulic trim tabs): Bennett, Instatrim, Trimmaster, TFX Teleflex, TX Controls
  • Compatibility (electromechanical trim tabs): Bennett, Lectrotab, Lenco, Eltrim, Ultraflex
  • ACS R: Longitudinal axis control
  • ACS RP: Control of the longitudinal and transverse axes
  • Boat length: 4.5 - 12 m
  • Trim tab type detection: Automatic
  • Sensitivity: Automatic, Adaptive to boot type
  • Size: W 80 x H 77.5 x D 10 mm
  • Waterproof: IP68 rated
  • Operating temperature: -10 to +85°C
  • Storage temperature: -40 to +85°C
  • Power supply: 10 - 30 V DC
  • Maximum current draw: 18 A (when trim tabs are activated)
  • Current consumption: 0.02 A (at idle)
  • Approval: CE (Compliance with EMC Directives)

GPSR Information

Hersteller
Name: Oy Mente Marine AB
Anschrift: Wolffintie 36
PLZ, Ort: F11, 65200 Vaasa
Land: Finland

Estimate shipping

You May Also Like

last seen