Skip to content

Victron Centaur Charger 24/60 (3) 24V 60A battery charger 3 outputs

Victron EnergySKU: CCH024060000


Due to the holidays and the subsequent inventory, there may be delays in delivery times. Parcel deliveries will be made until December 23 and between the holidays, while freight deliveries will be possible in isolated cases until December 23 and again from January 7, 2026. We apologize for any inconvenience and thank you for your understanding.

Price:
Sale price€783,02 EUR Regular price€1.126,93 EUR

Tax included Shipping calculated at checkout

Shipping in 8-10 working days

Description

The Victron Energy Centaur 24/60 (3) is a high-quality battery charger for 24V batteries with three charging outputs and a maximum charging current of 60A, which can be freely distributed across the three outputs. Thanks to its wide input voltage range of 90-265V AC, the Centaur 24/60 (3) can be used almost anywhere in the world without special settings. The IUoU charging characteristic with a three-stage profile ensures gentle charging of your battery(ies). The Centaur is suitable for charging GEL, AGM, and lead-acid batteries, with the battery type being quickly selectable via a DIP switch on the device housing.

The Centaur battery charger is fully high-frequency regulated. The power input is electronically regulated via the power factor in the first stage. The next stage provides galvanic isolation, ensuring perfect DC voltage at the outputs. The electronic components are protected against moisture and dirt by a special coating to guarantee the device's longevity. Three high-performance batteries can be charged simultaneously with this charger.

Key features of the Centaur 24/60 at a glance

  • for 24V battery voltage, IP20 protection class
  • Victron part number: CCH024060000
  • 3 battery charging outputs, each capable of delivering a full 60A charging current (maximum total charging current = 60A)
  • Suitable for batteries with a capacity of 240Ah – 600Ah
  • three-stage IUoU charging characteristic
  • Universal 90-265V AC input for mains connection, capable of operating at both 50 Hz and 60 Hz.
  • Suitable for charging gel, AGM and lead-acid batteries

Centaur 24/60 (3): Quality without compromise

An aluminum housing with epoxy powder coating, drip protection against condensation, and stainless steel mounting hardware allow the Centaur 24/60 to withstand the harshest conditions, such as heat, humidity, and saline environments. The circuit boards are protected against corrosion by an acrylic coating. Temperature sensors ensure that all power components operate within predefined limits and, if necessary, automatically reduce the output current under extreme conditions.

Three-stage charging characteristic with temperature compensation

The Centaur initially charges with a constant current (bulk) until the charging current drops to 70% of its nominal value. This is followed by a fixed four-hour constant-voltage phase, after which a trickle charge phase begins. The charging voltage is regulated by the internal temperature sensor (-2mV/°C per cell). The full charging current is distributed across three outputs, with each output delivering full power when only one battery is connected.

The Centaur 24/60 can use different battery types; the default setting is for gel batteries. Other batteries (lead-acid or AGM) can be used after adjusting the toggle switch (bottom left behind the front panel).

Scope of delivery:

1x Victron Energy CCH024060000 Centaur 24/60 (3) 1x installation instructions

GPSR Information

Hersteller
Name: Victron Energy BV
Anschrift: The Palm 35
PLZ, Ort: 1351, JG Almere
Land: Netherlands
Email: sales@victronenergy.com
Web: https://www.victronenergy.com

Estimate shipping

You May Also Like

last seen