Skip to content

Mente Marine ACS RP fully automatic trim flap control (longitudinal and transverse axis)

Mente MarineSKU: ACS RP

Price:
Sale price€649,00 EUR Regular price€769,95 EUR

Tax included Shipping calculated at checkout

Versand in 1-3 Werktagen

Description

Mente Marine ACS RP (Roll and Pitch) Fully automatic trim flap control for existing trim flaps relieves you of the work of trimming in course and wind changes as well as changed seating positions from passengers.
Compatibility (hydraulic trim flaps): Bennett, Instatrim, Trimmaster, TFX Teleflex, TX Controls
Compatibility (electromechanical trim flaps): Bennett, Lectrotab, Lenco, Eltrim, Ultraflex

The deep Vaums of the modern sports boats are designed to enable them in the rough water. The more the tea, the more there is the need to maintain a straight run with trim flaps. Rolling and the side inclination depends on the wind and the position of the passengers. The longitudinal slope, also called a trim position, depends on the speed and load. When changing the course, the wind direction also changes and the boat must be trimmed again. If passengers change their location, they must also be trimmed again. This necessity to constantly adapt the trim position to the changed load conditions unnecessarily distracts the boat guide and therefore represents a security risk at high speeds.

Longitudinal and cross axle
 
Menten marine fully automatic trim flap control 
 
Menten marine automatic trim flap control
The mente marine ACS RP (Roll and Pitch) fully automatic trimkneck control automatically places the boat into an optimal trim position in relation to the longitudinal axis by eliminating the cranes. Half -glider particularly leave the bug in a quick journey. The transverse axis control improves visibility and enables driving in the half -glider area. The acceleration is also improved. This is particularly suitable for large boats.

 

Mente Marine ACS RP fully automatic trim flap control (longitudinal and transverse axis)
Curve recognition
With curve maneuvers, the boat leans to the inside of the corner. A roundabout is installed in the system that recognizes such curve maneuvers. Therefore, trimmen corrections are not carried out during a cornering. Unnecessary trimming systems are therefore automatically prevented by the system and the boat leaves the curve with an optimal trim position. The LED display car flashes when the system detects a cornering and does not change the trim position. If a stable course is currently on, the new trim position is measured and the mente marine ACS system corrects the trim position due to the changed conditions.

Adaptive system
The mente Marine ACS system is preparing for boats of all sizes. Thanks to the adaptive system, the boat can drive with an optimal trim position, with the differences in the size and operation of the trim flap into account.
Different sea is also recognized by the system. In calm water, the system corrects faster than in Rauer See. This enables a quick reaction if necessary and prevents unnecessary trim flaps in tall waves.

Displacement trip
When the gliding speed is falling below, the trim flaps lose their effect. The mente Marine ACS recognizes this driving condition and does not try to correct in displacement. During the acceleration phase, the mente Marine ACS system automatically switches off and corrects the trim position even before the boat is “over the mountain”.
The car display flashes during the displacement trip. The flashing indicates that automatic mode is active, but is not used temporarily because of the slow speed.

Automatic/manual mode
The automatic button is used to adjust the operating mode of the mente Marine ACS system. A short press of the automatic button can be switched to automatic or manual mode.

In automatic mode, the trim position of the boat is automatically set, provided the display lights up. When the display flashes, the automatic mode is blocked while the boat takes a sharp curve and during the displacement trip.

Of course, the automatic can be switched off and the panel can be used as a manual control panel, which, for example, makes sense on rough water ride in order to trim the bug even deeper and thereby make the journey more comfortable.

TECHNICAL DETAILS
Compatibility (hydraulic trim flaps): Bennett, Instatrim, Trimmaster, TFX Teleflex, TX Controls
Compatibility (electromechanical trim flaps): Bennett, Lectrotab, Lenco, Eltrim, Ultraflex
ACS R: Control of the longitudinal axis
ACS RP: Control of the cross and longitudinal axes
Boat length: 4.5 - 12 m
Trim flaps-type detection: automatic
Sensitivity: automatic, adaptive to boot type
Size: W 80 x H 77.5 x D 10 mm
Waterproof: according to IP68
Operating temperature: -10 - +85 ° C
Storage temperature: -40 - +85 ° C
Power of voltage: 10 - 30 V DC
Maximum current recording: 18 A (if trim flaps activated)
Electricity recording: 0.02 A (in idle)
Admission: CE (agreement with the EMC guidelines)

GPSR Information

Hersteller
Name: Oy Mente Marine AB
Anschrift: Wolffintie 36
PLZ, Ort: F11, 65200 Vaasa
Land: Finnland

Estimate shipping

You May Also Like

last seen