Actisense WGX-1-ISOWiFi NMEA 0183 - NMEA 2000 Gateway and PC Interface (ISO connection)
WGX-1 NMEA 0183 and NMEA 2000® to Wi-Fi Gateway
The WGX-1 is an intelligent NMEA 0183 and NMEA 2000 WiFi gateway with bidirectional conversion functionality.
Transfer data from an NMEA 2000 backbone to any device (e.g. laptop, tablet or smartphone) connected to the WGX-1 via Wi-Fi, and additionally convert data bidirectionally between NMEA 0183 and NMEA 2000 using Actisense's renowned conversion engine. The WGX also functions as a wired gateway, enabling the transfer or conversion of data between existing NMEA 0183/NMEA2000 instruments. Actisense-i is a range of diagnostic tools and a health checker for your network, supplied free with the product. Logging of NMEA 2000 data is also possible when an SD card is inserted (not included).
The WGX-1 can be used as a conversion gateway between legacy NMEA 0183 systems and NMEA 2000 networks, as a transfer interface for NMEA 2000 data between network and PC, and also as a wireless gateway for streaming NMEA data to peripheral devices.
Converting existing devices
A common scenario for a WGX is connecting older NMEA 0183 devices to modern NMEA 2000 systems.
A perfect example is a vessel with NMEA 0183 GPS, wind and depth sensors, but also an NMEA 2000 network with MFDs. To transfer the NMEA 0183 data to the MFD, the data must be converted and output as NMEA 2000 PGNs.
The WGX receives, converts and transmits NMEA 0183 and NMEA 2000 data bidirectionally.
The WGX costs only a fraction of an NMEA 2000 GPS. Save money, time and space by using a WGX and leaving your existing equipment in place.
Connecting to a PC
Onboard computers running chart applications are becoming increasingly common. To transfer data into these NMEA 2000 programs, an interface between the NMEA 2000 network and the PC is required. The WGX transfers all data to/from an NMEA 2000 network and PC.
Many devices also require configuration on the network, which can be done via the Actisense WGX-1 (if the manufacturer specifies our gateway). Our products such as EMU-1, NGW-1 and NGX-1 are configured via the Actisense Toolkit, which can be done with a WGX-1.
Wireless connectivity
Demand for wireless connections is increasing, and with it the number of wireless applications. Requirements vary, ranging from wireless data transfer to a secondary device/display through to remote connectivity and monitoring of vessels and their logs.
The Actisense WGX-1 Wireless Gateway is an ideal, cost-effective and ready-to-use solution that requires only minimal configuration.
A common scenario with the WGX-1 is that the user needs a connection to their mobile phone/tablet to use an application such as Navionics. This is possible in just a few simple steps by setting up the WGX-1 to output NMEA 0183 via one of the data servers using TCP. The WGX-1 IP address and the data server port number are then entered into the application and the connection is established.
As the WGX-1 can function as a client (it connects as a device to an existing IP network), it can automatically be assigned an IP address (if DHCP is available). If the user has remote access to the network from their office/home, the network can be viewed by connecting to the WGX-1, with network voltage, device list and other information displayed.
The ability to convert, transfer and stream data wirelessly makes the WGX the “ultimate” gateway. Where other manufacturers require multiple products to achieve this, we do it with one cost-effective, highly intelligent product.
Features
- OPTO-isolated input and ISO-Drive output for safe connection to NMEA 0183 or RS232 / RS422.
- Data transfer rate of up to 230,400 baud.
- Integrated 0.75 m ISO cable.
- Advanced configuration with Actisense Toolkit allows setting Tx and Rx lists and Tx rates.
- Supports Fast Heading at 10 Hz.
- Actisense-i Network Health Checker provides valuable feedback on the status of the NMEA 2000 network.
- Supports both TCP and UDP data streaming over Wi-Fi.
- Extensive support for various mobile applications.
- Remote firmware upgrade capability ensures the device is future-proof.
- Robust IP67 housing.
- Essential NMEA 2000 diagnostic tool.
- Diagnostic LEDs on input and output
Benefits
- NMEA 2000 to Wi-Fi gateway and trip data logging in one device
- Converts NMEA 2000 to / from NMEA 0183 (streamed via Wi-Fi)
- Bi-directional conversion between NMEA 0183 / NMEA 2000 instruments.
- Depending on the mode, the device can be a transfer gateway or a conversion gateway.
- Supports both TCP and UDP
- Data protocols are selectable to be compatible with a wide range of navigation software and apps
- Remote firmware upgrade possible
- Diagnostic LEDs for NMEA 2000 bus activity and Wi-Fi status
- Durable IP67-rated housing
- Top-end Wi-Fi allows the device to operate simultaneously as an access point and connect in client mode to existing Wi-Fi networks
- Low power consumption - uses less than 2 LEN from the NMEA 2000 bus
- 2.4 GHz radio with integrated internal antenna supporting 802.11 b/g/n (up to 150 Mbit/s)
- Automatically measures and reports NMEA 2000 bus voltage
- User manual embedded on the device - accessible via browser
- Each device has a unique default SSID and password for enhanced security
Technical Data
Power Supply
Supply Voltage (NMEA 2000 Port):9 to 30V DC
Supply Current (NMEA 2000 Port):78mA @ 9V DC, Max 220mA
Load Equivalent Number (LEN):2
NMEA 2000 Port
Speed / Baud Rate:250kbps
Connectivity:M12 Male (A coded)
ISO Port
Compatibility:Full NMEA 0183, RS232 & RS422 compatible. RS485 Listener compatible
Speed/Baud Rate:4800 to 230400 Baud
Output Voltage Drive:>= 2.1V (differential) into 100Ω
Output Current Drive:20mA max.
Output Protection:Short circuit and ESD
Input Voltage Tolerance:-15V to +15V continuous -35V to +35V short term (< 1 second)
Input Protection:Current limited and overdrive protection to 40VDC
Connectivity:5mm stripped and tinned wire
Cable Length:0.75m
Isolation
NMEA 2000 Port to ISO Port:Uses IsoDriveTM, Hi-Pot tested to 1000V
Wi-Fi Radio
Compatibility:IEEE 802.11 b/g/n
Speed:802.11n up to 150Mbps
Frequency Band:Wi-Fi: 2412 -2484MHz
Max Output power:Wi-Fi: 19.14dBm (802.11b)
19.22dBm (802.11g)
19.12dBm (802.11n)
Antenna:Integrated internal antenna, 3.4dBi
Range (Open space):approx. 30 meters
Security:WPA_PSK, WPA2_PSK,WPA_WPA2_PSK
Configuration
IP support:Supports TCP & UDP broadcast
Data protocols:NMEA 0183 & Five proprietary
Security:Unique SSID and unique default Password per device.
(Password is user configurable)
Mechanical
Housing Material Body:Flame retardant Polycarbonate
Housing Material End Caps:Flame retardant PBT
Weight WGX-1-ISO:112g
Approvals and Certifications
NMEA 2000:NMEA 2000 Certified
NMEA 0183:IEC 61162-1 & 61162-2 compliant
RoHS and REACH:Compliant
Module Certification:KCC / BQB / IC / Wi-Fi / NCC / MIC / FCC DSS / FCC DTS / SRRC / CE
EMC:EN 60945:2002 Edition 4 (section 9.3), EN 301 489-1 V2.2.3, EN 301 489-17 V3.2.4, EN 300 328 V2.2.2 Radiated Spurious Emissions, FCC Part 15b, ICES-003 Iss 7
Environmental Protection:IP67
Operating Temperature:-25°C to +70°C
Storage Temperature:-30°C to +70°C
Recommended Humidity:0 to 93% RH @ 40°C
Guarantee:5 years upon registration
