Victron Centaur Charger 12/20 (3) 12V 20A Battery Charger 3 Outputs

Victron Energy |CCH012020000
GTIN: 8719076021476

Centaur Charger 12/20 (3) 12 V from Victron

Charging current: 20 A
for 12 V batteries
highest quality and robustness
three powerful outputs
can be used worldwide (90V~ to 265V~ at 50/60 Hz)

-34%

7008,62 Kč

RRP ~~10649,30 Kč~~

incl. 0% VAT , Shipping costs for orders according to (DE) §12 para. 3 UStG

Choose tax zone / country of delivery

0% VAT for photovoltaics (Section 12 (3) UStG). For further information, please see und here

Low stock level
Ships in 8-12 business days (Mon-Fri) (DE - int. shipments may differ)

Description
GPSR Information

The Centaur 12/20 (3) from Victron Energy (MPN CCH012020000) is a high-quality battery charger for 12V batteries with 3 charging outputs and a maximum charging current of 20A, which can be distributed across the 3 outputs as required. Thanks to its wide input voltage range of 90-265 V AC, the Centaur 12/20 (3) can be used almost anywhere in the world without any special settings. The IUoU charging characteristic with three-stage profile ensures gentle charging of your battery(ies). The Centaur is suitable for charging GEL, AGM and lead-acid batteries, with the battery type quickly selectable via a DIP switch on the device housing.

The Centaur battery charger is fully high-frequency controlled. In the first power stage, the power input is electronically regulated via the power factor. The next stage provides galvanic isolation and ensures perfect DC voltage at the outputs. The electronic components are protected against moisture and dirt by a special coating to ensure the long service life of the device. Three high-performance batteries can be charged simultaneously with this charger.

Key features of the Centaur 12/20 at a glance

for 12V battery voltage, IP20 protection rating

Victron part number: CCH012020000

3 battery charging outputs, each can deliver the full 20A charging current (maximum total charging current = 20A)

suitable for batteries with a capacity of 80Ah – 200Ah

three-stage IUoU charging characteristic

universal 90 – 265V AC mains input, suitable for operation at both 50 Hz and 60 Hz

suitable for charging gel, AGM and lead-acid batteries

Centaur 12/20 (3): Quality without compromise

An aluminium housing with epoxy powder coating, drip shield against condensation, and stainless steel mounting parts allow the Centaur 12/20 to withstand the toughest conditions such as heat, humidity and salty atmospheres. The circuit boards are reliably protected against corrosion by an acrylic coating. Temperature sensors ensure that all power components operate within specified limits and, if necessary, the output current is automatically reduced under extreme conditions.

Three-stage charging characteristic with temperature compensation

The Centaur initially charges with constant current (Bulk) until the charging current has dropped to 70% of the rated value. This is followed by a fixed four-hour constant-voltage phase, at the end of which a float charging phase begins. The charging voltage is regulated via the internal temperature sensor (-2mV/°C per cell). The full charging current is distributed across three outputs, with each output delivering full power on its own if only one battery is connected.

Different battery types can be used with the Centaur 12/20; the default setting is for gel batteries. Other batteries (lead-acid or AGM) can be used after the corresponding setting is made on the DIP switch (bottom left behind the front panel).

Scope of delivery:

1x Victron Energy CCH012020000 Centaur 12/20 (3) 1x Installation manual

Shipping weight:

4,75 kg
Item weight:

4,30 kg

Manufacturer
Name: Victron Energy B.V.
Street: De Paal 35
ZIP-Code, City: 1351 JG Almere
Country: Niederlande
Email: sales@victronenergy.com
Web: https://www.victronenergy.com