The Victron Energy Lithium SuperPack NG 25.6V/100Ah (MPN: BAT524110740) is a LiFePO4 power battery with a capacity of 100 Ah and a rated energy of 2,560 Wh for mobile and stationary 24-V systems. The SuperPack NG series combines an integrated BMS with a battery monitor, Bluetooth, and VictronConnect, self-heating, and an external feedback signal (EFS). The battery can be connected in parallel to increase capacity; series connection is not permitted.
Lithium SuperPack NG 25.6 V with 100 Ah
25.6 V nominal voltage and 100 Ah capacity
2,560 Wh rated energy
LiFePO4 battery technology
Integrated BMS with cell balancing and battery monitor
Bluetooth and VictronConnect for monitoring and configuration
Integrated self-heating for low temperatures
50 A recommended continuous discharge current
Up to 5,000 cycles at 50% depth of discharge
EFS output for external control and protection functions
Can be connected in parallel to increase capacity
Series connection not permitted
IP65 protection rating
M8 female thread for battery connection
Integrated BMS with Bluetooth and VictronConnect
The integrated battery management system monitors cell voltages, current, and temperature, and protects the battery against overvoltage, undervoltage, overcurrent, and unsafe temperatures. Charging and discharging can be interrupted independently of one another. Via Bluetooth and the VictronConnect app, you can monitor the state of charge, battery temperature, warnings, and alarms, as well as configure battery parameters.
Self-heating for low temperatures
The integrated self-heating system enables charging even at low ambient temperatures. If the cell temperature drops below 0 °C during charging, the BMS first interrupts the charging process and heats the cells. Charging resumes as soon as a suitable cell temperature is reached. The maximum heating power is 130 W.
Expandable in parallel with an external feedback signal
To increase available capacity, multiple SuperPack-NG batteries can be operated in parallel. The maximum system current must not exceed 800 A. Series connection to increase the system voltage is not permitted. The external feedback signal (EFS) can be used to transmit protection events to external devices or to control connected charging and disconnecting devices.
Technical Specifications
Battery
Battery technology: Lithium iron phosphate (LiFePO4)
Nominal voltage: 25.6 V
Rated capacity at 25 °C: 100 Ah
Rated energy at 25 °C: 2,560 Wh
Overall efficiency: 93%
Internal resistance: 4 mΩ
Integrated BMS: Yes
Battery monitor: integrated
Charging and Discharging Data
Recommended continuous discharge current: 50 A
Maximum discharge current: 200 A for approximately 10 minutes under defined conditions
Cut-off voltage: 22.4 V
Recommended charging voltage: 28 V
Programmable charging voltage range: 27–28.4 V
Float voltage: 27 V
Recommended charging current: 30 A
Maximum continuous charging current: 100 A
Maximum self-heating power: 130 W
Cycles
Cycle life at 80% depth of discharge: 2,500
Cycle life at 70% depth of discharge: 3,000
Cycle life at 50% depth of discharge: 5,000
Capacity at end of cycle: at least 80% of rated capacity
Communication and System Integration
Communication: Bluetooth via VictronConnect
External output: EFS feedback signal
Parallel connection: permitted
Series connection: not permitted
Maximum system current in parallel connection: 800 A
General
Protection class: IP65
Temperature range during charging and discharging: −30 to +60 °C
Charging below 0 °C: after the cells have warmed up through self-heating
Current connections: M8 female thread
Mounting position: upright or on the long side
Dimensions (L × W × H): 466 × 198 × 173 mm
Weight: 20.5 kg
Transport classification: UN3480, Hazard Class 9
Transport test: UN 38.3
Package Contents
1 × Victron Energy Lithium SuperPack NG 25.6V/100Ah
1 × Connector for the external feedback signal (EFS), Victron SPR00310
1 × set of mounting brackets
1 × set of connection hardware for the M8 threaded inserts
