TheVictron Phoenix 48/1200ve.direct is a small sine inverter with a 1200W continuous output. The device converts 48V DC voltage from your battery into 230V AC alternating current and with a pure sinus voltage and uncompromising electricity quality, which is also ideally suited for sensitive electronics products.
Directional efficiency and modern system communication
The efficiency of the Phoenix is excellent and thanks to the Eco fashion one of the highest in its class. Via the VE.Direct Communication connection you can connect with optional accessories, the device to a computer or smartphone and program some system parameters such as the switch -off voltage and re -switching voltage with empty battery! Many other configuration options such as output frequency and output voltage as well as a 2-pin alarm contact are among the performance features of this voltage converter.
The scope of services of the Phoenix series VE.Direct 48/1200 is currently on the market for the price and goes far beyond the skills of other devices from the same performance classes.
Technical features of the Phoenix 48/1200 Ve.direct
1000 watts of continuous power at 230V 50Hz sinus voltage
1200 watt continuous output with non -linear load
full control over almost all system parameters
Suitable for all common batteries with 48V battery voltage
230V AC electricity with pure sinus shaft provides perfect power quality
freely programmable input and offset swells
freely adjustable output voltage in the range of 210 - 245V
Technical highlights of the Phoenix Ve.direct series 250VA - 1200VA
Ve.direct connection enables the combination converter to be connected to a computer (VE.Direct to USB interface cable) or your smartphone on which you always keep an eye on the status of your device with the free Victron app (Ve.direct Bluetooth Smart Dongle necessary).
Fully programmable parameters:
Threshold values for triggering and resetting alarms with a low level of loading of the battery
Threshold values for switching off and restarting with low battery voltage values
Output voltage 210 - 245V
Frequency 50 Hz or 60 Hz
Threshold value for ECO mode on/off and ECO mode sensor
ECO mode integrated:
In ECO mode, the inverter switches to standby as soon as the load drops under a preset value. In standby mode, the inverter then switches on for a short period of time (regulable default setting: every 2.5 seconds). If the load exceeds a preset threshold value, the inverter remains on.
Proven reliability of the current converter:
The complete bridging with a ring transformer popology has proven itself for years. The inverters are short -circuit -resistant and protected against overheating (whether caused by overload or by the ambient temperature).
High switch -on performance:
This is required to switch on loads such as voltage formers for LED lamps, halogen lamps or power tools.
Remote-controlled input/output possible:
A remote-controlled on/off switch can be connected with a two-pin connector or between the plus pole of the battery and the left contact of the two-pole plug.
