The Skylla-IP65 24/30 (1+1) from Victron Energy (MPN SKY024030000) is a powerful 24V battery charger for larger battery banks. It has a 30A main charging output and a 3A secondary charging output for a starter battery. With the Skylla-IP65 24/30 (1+1), you can charge all common lead-acid batteries as well as modern lithium-ion batteries.
Compared to the Skylla-i series, the Skylla-IP65 family has an anodized steel housing, which makes it even more robust against environmental influences. In addition, the IP65 devices are equipped with a convenient LCD display that allows you to read the device status or adjust the charging algorithms.
robust construction with IP65 protection
Epoxy powder-coated steel housing and splash-proof. Withstands the challenges of a difficult environment: heat, humidity, and salty air. An acrylic coating provides optimum protection for the circuit boards against corrosion. Temperature sensors ensure that the power components are always operated within the specified limits. In extreme environmental conditions, the output current is automatically reduced if necessary.
integrated CAN bus interface (NMEA)
In addition to a CAN bus (NMEA2000) interface, a rotary knob, DIP switches, and potentiometers are also available to adapt the charging algorithm to a specific battery and its conditions of use. A complete overview of the various options can be found in the manual.
Features of the Skylla-IP65 24/30 (1+1)
The Skylla-i 24/60 is a state-of-the-art, high-performance battery charger for 24V batteries that can withstand the challenges of a difficult environment: heat, humidity, and salty air – a true professional device!
- for 24V battery voltage, 1x main charging output with max. 30A charging current, 1x secondary charging output 3A for starter battery
- suitable for batteries with a capacity of 150Ah - 300Ah
- always the right amount of charge for a lead-acid battery: adjusted constant voltage time
- BatterySafe mode: prevents damage caused by excessive gas development
- adaptive, seven-stage charging algorithm for lead batteries
- integrated LCD display for status monitoring and adjustment of charging algorithms
- three-stage charging algorithm for lithium-ion batteries, including on/off control and CAN bus control
- Storage mode: Less maintenance and aging when the battery is in standby mode
- Smaller and lighter compared to similar models
- NMEA2000 Canbus connection
- PowerControl: Setting of maximum shore power
the most important functions of the Skylla-IP65 24/30 (1+1)
Synchronized parallel operation
Multiple chargers can be synchronized using the CAN bus interface. This is achieved by simply connecting the chargers to each other via RJ45 UTP cables. Please refer to the manual for further details.
The correct charge amount for a lead-acid battery: adjusted constant voltage time
If only weak discharges occur, the constant voltage time is kept short to prevent overcharging of the battery. After a deep discharge, the constant voltage phase is automatically extended to ensure that the battery is fully charged.
Preventing damage from excessive gas generation: Battery protection mode
To shorten the charging time, the aim is to achieve the highest possible charging current in conjunction with a high constant voltage. However, to prevent excessive gas generation towards the end of the constant current phase, the Skylla-i limits the rate of voltage increase after the gassing voltage has been reached.
Less maintenance and aging when the battery is idle: storage mode
Storage mode is always activated when there has been no discharge within 24 hours. In storage mode, the charge retention voltage is then reduced to 2.2 V/cell (26.4 V for a 24 V battery) to minimize gas development and corrosion on the positive plates. Once a week, the voltage is raised back to the constant voltage threshold to "refresh" the battery. This achieves a kind of equalization charge that prevents electrolyte stratification and sulfation—the two main causes of premature battery failure.
To extend battery life: temperature compensation
A battery temperature sensor is supplied with every Skylla IP65 device. The temperature sensor ensures that the charging voltage decreases as the battery temperature rises. This is particularly important for gel batteries or when high temperature fluctuations are to be expected.
Battery voltage sensor
To compensate for voltage losses due to cable resistance, the Skylla-IP65 has a voltage sensor in the charging circuit so that the battery always receives the correct charging current.
Use as a power source
Due to its perfectly stabilized output voltage, the Skylla-IP65 24/30 (1+1) charger can be used as a power source when no batteries or large buffer capacitors are available.
optional remote control panel and CAN bus connection
The Skylla-IP65 24/30 (1+1) has an optional control panel that offers extensive control options for the Skylla-i. The CAN bus connection also allows the battery charger to be integrated into larger system networks that need to be centrally monitored and controlled.
Scope of delivery:
1x Victron Energy SKY024030000 Skylla-IP65 24/30 (1+1)
1x Installation instructions
