Description
1 Opto-isolated NMEA 0183 inputs (Listener), 6 ISO-Drive NMEA 0183 Outputs (Talker), Serial Port
Pro-NBF-1 type tester NMEA buffer
Connect a talker with six lists with complete insulation
The type-checked NMEA buffer Pro-NBF-1 buffer isolated and buffert NMEA 0183 data with the power to control several devices.
Commerce to distribute up to six identical, reinforced data flows from a source, the NMEA signals are buffered to ensure that each lister receives the data with the required voltage levels and ensures consistent data quality.
Insulation at the entrances and outputs ensures the protection of the Quell Talker device and the lister devices.
The NMEA buffer has ISO-Drive ™ technology at the outputs and opto isolation at the entrance, which means that you can connect the NMEA 0183 buffer without hesitation.
The stainless steel housing makes the device robust, robust and increases the lifespan. The metal housing also acts as a HF shielding and makes the device an ideal addition to commercial installations.
For quick and easy installation, the Pro-NBF-1 has 2-part connectors that enable the use of screw terminals* and a professional DIN rail assembly system (DIN rail does not include in the scope of delivery). The device can also be installed directly on the front wall.
The optionally available strain relief bars ensure reliable professional cable management.
Helpful LEDs indicate the electricity, input and output operation.
Characteristics:- An optoisoled entrance
-Six ISO-Drive ™ outputs
- Outputs automatically track the input building rate
-Compatible with RS-232, RS-422 and RS-485 Listener
- ISO-Drive separates the lister from the talker to protect both the NBF-3 and every connected device
- Wide compatibility means simplified installation
- Easy installation saves time and money and gives security
- type approved (Rina)
| power supply | |
| Input supply voltage | 9 to 35 V DC |
| Input supply flow | 150mA max at 12V DC (all outputs at full control in 100Ω loads) |
| Input protection | Continuous reversal and ESD protection |
| Power knife | LED, blue - indicates that the device works properly |
| Input supply connection | Plug-in 2-pin screw clamp, grid 5.08 mm |
| NMEA 0183 port-Listener & Talkers | |
| Number of listers / entrance sports | An isolated NMEA 0183 listener |
| Number of talks / starting sports | Six isolated NMEA 0183 spokesman |
| compatibility | Complete NMEA 0183, RS422 & RS232 compatible. RS485 list compatible |
| Speed / baud rate | 4800 to 115200 BPS |
| Talker output power drive | > = 2.2V (difference) on 100Ω |
| Talker output power driver | 20ma max. |
| Protection of the loudspeaker output | Short circuit and ESD |
| Speaker data advertisement | LED, orange (flashes with data rate) |
| Input voltage tolerance of the listener | -15V to +15V continuously, -35V to +35V briefly (<1 second) |
| Listener entrance protection | Electricity limited, over-control protection up to 40 V DC and ESD protection |
| Listener data display | LED, green (flashes to display a valid input) |
| connections | Plug-in 2/3-way screw terminals, grid 5.08 mm |
| isolation | |
| NMEA 0183 listener | Opto-isolated, Hi-Pot tested up to 1000V |
| NMEA 0183 spokesman | Used Isodrive TM , Hi-pot tested up to 1000 V |
| Mechanically | |
| Housing material | Stainless steel 316 |
| Dimensions | 139 mm (L) x 128 mm (W) x 27 mm (h) |
| Weight | 335g |
| Assembly | Scot assembly or DIN rail mounting (DIN kit 1) |
| Approval and certifications | |
| EMC | EN 60945: 2002 (fourth edition-2002), DNVGL-CG-0339: 2019 |
| Compass security distance | 600 mm |
| Type approval certificate | Rina |
| operating temperatur | -25 to +70 ° C |
| Storage temperature | -40 to +85 ° C |
| Maximum relative humidity (RH) | 95% at 55 ° C |
| environmental Protection | IP40 |
| guarantee | 5 years |
- Certified according to uniform requirements of IACS E10 / IEC 60945
- Plug-in 2/3-pin screw terminals, 5.08mm pitch
- Compatible with RS422-, RS232 and RS485 connections
- Up to 115200 baud
EN 60945: 2002 (fourth edition-2002), DNVGL-CG-0339: 2019
GPSR Information
Name: Actisense
Anschrift: 21 Harwell Road 22
PLZ, Ort: BH17 0GE, Poole
Land: United Kingdom
Email: michael.leggett@actisense.com
Web: www.actisense.com
Name: Elna GmbH
Anschrift: Heidehofweg 22
PLZ, Ort: 25499, Tangstedt
Land: Germany
Email: info@elna.de