Description
Squire the wallers with digital signal processing technology new digital life.
The DST-2 digitizes deep, speed and temperature signals in NMEA 0183 data to enable first-class sea floor tracking.
It works with NMEA 0183-compatible devices such as card plotters, radar devices or a on-board PC. In addition, it can be calibrated via a PC to compensate for different sensors and installations.
The use of a DST with an existing echo sounder can be much more cost -effective than having to lift the boat out of the water in order to change the cladding of the donor. This not only saves money, but also time.
- Selection of available converter frequencies
- Flash-updable 'future-proof' design
- creates the 'ping' of the echolote and analyzes the returned signal
- digitized analog signals in NMEA 0183 data Services
- Use with the most NMEA 0183 displays
- can be calibrated
- Travel data available with speed sensors
- Developed to replace outdated independent echolote
- General survey firmware available
- digitized analog signals in NMEA 0183 data
- Frequency range available
- Flash-updable 'future-proof' design
| Supply voltage |
|
11 | 28 | V |
| Supply current | Supply voltage 12V | 30 | 40 | MA |
| Supply voltage 24V | 30 | 40 | MA | |
| Nmea on/off | ||||
| Input voltage tolerance | Continuous operation | -15 | +15 | V |
| Different input voltage | Required level for data to be recognized | 2.0 | – | V |
| Output current | RS485 / RS422 compatible | – | 10 | MA |
| baud rate | 4800 | – | BPS | |
| Data output rate | – | 1 | Sec | |
| depth | Sensor -dependent (configurable cal) |
|
|
|
| Rang (narrow ray) | Airmar P66, P79, <10 knots, ideal conditions | 0.3 | 200 | meter |
| Range (broad -beaming) | Airmar DT800, <10 knots, ideal conditions | 0.5 | 150 | meter |
| Rang (narrow ray) | Airmar P66, P79, 10-40 nodes, ideal conditions | 0.3 | 100 | meter |
| Range (broad -beaming) | Airmar DT800, 10-40 nodes, ideal conditions |
0.5 |
100 |
meter |
| speed | Sensor -dependent (configurable cal) | |||
| Area | Airmar P66, DSt800, calibrated 5 Hz / knot | 0.5 | 50 | node |
| temperature | Sensor -dependent (configurable cal) | |||
| Area | Airmar, calibrates 10k @ 25 ° C | -10 | 50 | ° C |
| Generally | ||||
| Screw clamping area | Housed cable diameter | 4.5 | 10 | mm |
| Ambient temperature |
|
-20 | +70 | ° C |
3 different versions available:
Converter for analog echoloters-DST-2-150
Analogous to NMEA 0183 converter for 150kHz donor (depth, speed and temperature)
Art. No.: 188005
Converter for analog echoloters-DST-2-170
Analogous to NMEA 0183 converter for 170kHz donor (depth, speed and temperature)
Art. No.: 188006
Converter for analog echoloters-DST-2-200
Analogous to NMEA 0183 converter for 200kHz donor (depth, speed and temperature)
Art. No.: 188007
GPSR Information
Name: Actisense
Anschrift: 21 Harwell Road 22
PLZ, Ort: BH17 0GE, Poole
Land: United Kingdom
Email: michael.leggett@actisense.com
Web: www.actisense.com
Name: Elna GmbH
Anschrift: Heidehofweg 22
PLZ, Ort: 25499, Tangstedt
Land: Germany
Email: info@elna.de