Skip to content

Victron BlueSolar MPPT 100/20 up to 48V solar charge controller

Victron EnergySKU: SCC110020170R

Price:
Sale price€62,18 EUR Regular price€92,82 EUR

Tax included Shipping calculated at checkout

Shipping in 8-10 working days

Description

The Victron Energy MPPT 100/20 belongs to the BlueSolar MPPT charge controller family and offers ultra-fast power tracking, which can increase the yield of your solar system.

Ultra-fast maximum power point tracking
By continuously monitoring the voltage and current output of your solar (PV) modules, MPPT technology ensures that all available energy is extracted from the modules and stored. The benefit of this is most noticeable when the sky is partly cloudy and the light intensity is constantly changing.

Characteristics
Suitable for 12V/24V/48V systems
Short-circuit proof load output
Intelligent battery management with Battery Life
Programmable battery charging algorithm
Day/night time control and light dimming option
Intelligent VE.Direct data communication port for connecting to additional devices such as Bluetooth Smart Dongle or GX Color Control Panel
Integrated protection against output short circuit / overtemperature

Remote monitoring and control
You can remotely control and monitor the extensive functions of your BlueSolar MPPT charger by attaching a Bluetooth dongle and pairing it with your smartphone or another device via VictronConnect. If your system is connected to the Victron Remote Management (VRM) internet portal via a GX device, you have full access to your MPPT anytime, anywhere. Both VictronConnect and VRM are available free of charge.

load output
Over-discharging the battery can be prevented by connecting all loads to the load output. The load output disconnects the loads when the battery has discharged to a predefined voltage level. Alternatively, an intelligent battery management algorithm can be selected: see Battery Life.
The load output is short-circuit protected. Some loads (especially inverters) are best connected directly to the battery. The inverter remote control is best connected to the load output. A special interface cable may be required; please refer to the manual.

Battery Life: Intelligent battery management
If the solar charge controller is unable to fully charge the battery within a day, the battery status will constantly fluctuate between "partially charged" and "end of discharge." This operating mode (no regular full charging) will damage a battery within a few weeks or months.
The Battery Life algorithm monitors the battery's state of charge and, if necessary, raises the load disconnect threshold daily (i.e., the load is disconnected earlier) until the recovered energy is sufficient to charge the battery to nearly 100%. From this point onward, the load disconnect threshold is modulated so that a near-100% charge is achieved approximately once a week.

Technical data
Battery voltage (automatic selection): 12V/24V/48V
Nominal charging current: 20A
Nominal PV power 12V / 24V / 48V: 290W / 580W / 1160W
Max. PV open-circuit voltage: 100V
Peak efficiency: 98%
Loading algorithm: multi-stage, adaptive
Operating temperature range: -30°C to +60°C
Protection rating: IP43 (electronic components), IP22 (connection area)
Dimensions: 100 x 113 x 60 mm
Weight: 0.65 kg

Scope of delivery
1x Victron SCC110020170R BlueSolar MPPT 100/20 charge controller

GPSR Information

Hersteller
Name: Victron Energy BV
Anschrift: The Palm 35
PLZ, Ort: 1351, JG Almere
Land: Netherlands
Email: sales@victronenergy.com
Web: https://www.victronenergy.com

Estimate shipping

You May Also Like

last seen