Skip to content

Victron Argofet 200-2 200a 2 batteries fet insulator

VictronSKU: ARG200201020R

Price:
Sale price€119,00 EUR Regular price€152,32 EUR

Tax included Shipping calculated at checkout

Shipping in 1-3 working days

Description

The Victron Argofet Isolator 200-2 is able to supply 2 separate battery cycle from one another from just one power source with up to 200a charging current. The power source can be the alternator or a charger. Since the individual battery trees are not connected to each other, they cannot unload each other or otherwise influence each other. The difference to battery separating diodes is that FET isolators generate no voltage loss and thus have a much higher efficiency. Technical features of the Argofet Isolator 200-2

  • A maximum of 200a charging current and connections for 2 battery circuits
  • With 0.02V with low and 0.1V with high streams, practically no more voltage losses, which makes a voltage increase to compensate for compensation

Practically no more tension losses, in contrast to separation diodes, there is practically no loss of voltage with FET isolators. The voltage drop is less than 0.02 volts with low streams and only 0.1 volts with higher streams. With Argo Fet Battery Separation, no increase in voltage is required. However, one should pay attention to short cable lengths and sufficient cross -sections.

As a small example: A 100 A electricity has a voltage loss of 0.26 volts with a cable length of 10 m and 50 mm2 cable cross -section. With 5 m cable with 10 mm2, a 50 A current causes a voltage loss of 0.35 volts! This means that FET isolators are among the most efficient charging current distributors that are currently available on the market.

Scope of delivery 1x Victron ARG200201020R ARGOFET 200-2 FET isolator 200A / 2 batteries 1x operating instructions

GPSR Information

Hersteller
Name: Victron Energy BV
Anschrift: The Palm 35
PLZ, Ort: 1351, JG Almere
Land: Netherlands
Email: sales@victronenergy.com

Estimate shipping

You May Also Like

last seen